EVBQE128【PDF 1/2 页】BOARD EVAL FLEXIS QE128 FAMILY

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录324

[1页]2页

EVBQE128 Quick Start Guide

Install CodeWarrior TM

Development Studio

Insert Micro in Socket

Board Connection

cally appear. Follow the

on-screen instructions.

BeforeconnectingtheEvaluationBoardtothePC,itis

recommended that you install CodeWarrior first, so that the

appropriate USB driver will be

automatically found by Win-

dows when you connect

the Evaluation Board.

Flexis QE128 To install the Code-

Warrior Develop-

ment Studio, insert

the Flexis QE128

DVD-ROM into your

computer ’s DVD-

ROM drive. A startup

window will automati-

includes: CodeWarrior

Development Studio

Insert either the MC9S08QE128 or MCF51QE128 microcon-

troller into the socket, using the provided pick-up vacuum

pump. Please verify the correct alignment of microcontroller

pin 1 with socket pin 1.

Power the board through either the barrel connector or the

USB connector, making sure that the “POWER SEL” jumper

selects the correct power source. Slide the “ON-OFF” switch

to the “ON” position. The “POWER” LED will turn on.

Insert one end of the USB

cable into a free USB port

of the PC.

Insert the other end of the

USB cable into the USB

connector on the board.

The first time the board

is connected to the PC,

Windows recognizes the

instrument and starts the “Found New Hardware Wizard”

procedure, asking you to specify the driver to use for the

instrument. Follow the Wizard steps, choosing to install the

software automatically when requested.

Standalone Mode

Standalone Mode - Part 2

Congratulations!

In standalone mode, no PC connection is required, unless you

are powering the board through USB. Both microcontrollers

are factory programmed with the same sample application.

To run the built-in example:

● Ensure that all of the jumpers in the “I/O” sections are

inserted.

● Press the "PTD4" push-button. The value of the ADP0/PTA0

potentiometer will be displayed on the PTE[7..0] LEDs.

● Press the "PTD5" push-button. The value of the light sensor

will be displayed on the PTE[7..0] LEDs.

● Press the "PTD6" push-button. The APD0/PTA0 potentiom-

eter will vary the frequency of the sound played by the

buzzer.

● Press the "PTD7" push-button. The value of the temperature

sensor will be displayed on the PTE[7..0] LEDs.

The output of the potentiometer, light sensor and temperature

sensor is also sent to the host PC (if connected) through the

virtual COM port over the USB connection.

To see the data sent to the virtual COM port, do the following:

● Ensure that the J206 jumpers (“COM1 ENA”) select the

“MDI” position;

● Connect the board to the PC through the USB connection;

● Check the “Device Manager” for the correct port number;

● Start your terminal utility (e.g. HyperTerminal) with these

parameters:

Baud rate: 9600

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

For an in-depth guide of all of the

user interface features, read the

User ’s Manual present on the DVD.

Professional programming solution for

QE128 micros and other Freescale MCUs

FlashRunner: Standalone In-System Programmer

● Fast and Reliable for the Industrial

Environment

● Programming Algorithms as Fast

as Memory Technology Limit

● Easy Integration in Programming

Lines (ATE, ICT, Test Fixtures)

http://www.softecmicro.com/pgt

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式